1. The water-cooled cable electrode is made of high quality copper, the conductive contact plane is carefully processed, the roughness reaches level 1.6, and the surface is treated with anti-corrosion and anti-oxidation tin plating. Both ends are rotating electrodes to adjust the mounting angle within 360°. The structure and shape and size of the electrode can be designed and made according to the needs of the user. 2.Water-cooled cable soft wire: the use of anaerobic copper TU1 pulled into a single wire, stranded, surface with tin treatment. Soft, bending radius is small, not easy to break. 3.Water-cooled cable outer sheath insulation casing, the selection of electric furnace special carbon-free insulation rubber pipe, high natural rubber content, soft, outer sheath hose used in high temperature environment, good anti-aging performance, strong tension resistance, long service life. 4. The blasting pressure of the outer sheath hose of the water-cooled cable is 3MPa, the water pressure is 1.6MPa, and the breakdown voltage is 6000V. 5, the water-cooled cable outer sheath hose and electrode seal is tight, the clamp is made of magnetic non-ferrous non-ferrous metal material, no heat, good sealing effect, long service life. 6. The insulation layer material of the water-cooled cable sheath hose is EP, nitrile rubber and silicone rubber blend, soft, long service life, water pressure resistance gt1.6MPA and breakdown voltage resistance higher than 10KV. 7.Water-cooled cable protection of carrying capacity greatly improved, has soft, small bending radius, large effective section, light weight, small volume, high temperature resistance, corrosion resistance, heat is small, and small electrode connection stress, repeatedly tilt furnace, inverted furnace work, water-cooled cable electrode and soft wire connection parts not broken, can use in 180℃ temperature for a long time, greatly prolong the service life of water-cooled cable protection. 8.Medium frequency furnace water cooled cable commonly used water cooled copper cable copper 240mm2,300mm2,350mm2,400mm2,500mm2,600mm2,800mm2 several specifications, the standard length of 2.5m. The copper head of the water-cooled cable electrode can be customized according to the user's needs. 9.Water-cooled cable copper stranded wire as a current conductor, copper wire purity is 99.99%, resistivity 0.016981 Ω mm / m, conductivity 100.6% -101.6%. 10. The joint of water-cooled cable adopts cold pressure forming process (which can be easily disassembled) and is pressed with copper stranded wire. This way of firm connection, small contact resistance, does not damage the copper stranded wire. The single joint and the copper wire can withstand the tension of more than 8t, and the internal connection is connected with the copper stranded wire through the cold pressure forming process, in which the firm contact resistance is small. 11.The removable structure of water-cooled cable does not need to destroy the internal copper stranded wire, only need to open the bolt on the connector can be convenient to replace the external, the joint inside with inclined cone sealing and conductive. When the close head bolt, it will naturally play a role of both conductive and sealing.